Keyboard & Mouse Tools

Mouse Double Click Test

Use this mouse double click test with slow, separated single presses. Choose one button and review suspicious intervals rather than deliberately double clicking.

Pointer timing Adjustable threshold Input type
Local by default
Your test data is processed locally in your browser and is not uploaded.
Ready to test

Dedicated click timing area

Make about twenty separated single clicks with one button. Compare intentional double clicks in a separate run.

Recorded presses (last 60)0
Close intervals0
Shortest interval—

Input type: not tested. Short intervals only suggest unwanted repeats when you intended slow single presses. Touch and pen input are not mouse-switch evidence.

How to test if mouse is double clicking

This mouse double click tester records browser pointer-down intervals. Make deliberate single clicks to investigate unwanted repeats; intentional fast double clicks are a separate control test.

Run a slow single-click test

Start with the default 100 ms threshold. It is a screening setting, not a universal switch specification.

  1. Activate the test area; the activation click is excluded.
  2. Choose one mouse button. Make about twenty separate clicks, releasing fully and pausing roughly half a second between presses.
  3. Review the close intervals. Reset, then repeat with the other button or another mouse.

Read close intervals without overdiagnosing

An interval below your threshold is a suspicious pair only when you intended a single press. Timing alone cannot identify contact bounce, macros or a driver issue. Touch and pen input do not test a physical mouse switch.

Mouse double clicking: what to compare next

Repeat on a direct USB port, in another app and on another computer if available. Check operating-system double-click settings and mouse software. A clean short run cannot rule out an intermittent fault.

Troubleshooting

If the result is not what you expected

1

Keep focus in the test

Input tests capture events only inside the clearly marked active area.

2

Try a direct port

Reconnect wired devices without a hub and retest the same control.

3

Compare another app

OS shortcuts and browser event filtering can hide otherwise working controls.

Method

How it works

  1. Choose a threshold and click the dedicated area about twenty times.
  2. The test records monotonic click intervals and the pointer input type.
  3. Review short intervals as possible repeats and retest deliberately.
Browser limitations

What this result cannot prove

  • This cannot fully separate a mechanical issue from deliberate double-clicking or technique.
  • Touch events are labeled separately and are not treated as mouse hardware evidence.
Check browser support
Keep checking

Related tools

Questions

Frequently asked questions

Can a mouse double click test distinguish a macro from a worn switch?

No. It observes browser events after firmware and software processing. Compare a run with macros disabled, another app and a known-working mouse. Repeated close pairs during intended single presses are a clue, not a hardware diagnosis.

Is a mouse double click test the same as a speed test?

No. A fault check uses separated single clicks. A speed test deliberately creates short intervals and cannot provide the same evidence.

Can this measure mouse debounce time?

It sees events after firmware and operating-system filtering. It cannot measure raw switch bounce or the firmware debounce delay.

Why test one button at a time?

Mixing left and right presses can produce close intervals without a repeat on either switch. The test separates button histories, and a focused run is easier to compare.