Mic Test with Recording and Playback
Run a mic test, check the input level, record a short sample and listen to playback. Separate microphone input from speaker or headphone output.
Live microphone workspace
Your browser will ask for permission only after you start.
Speak and see the signal
Allow microphone access, then speak at a normal distance. The waveform and measurements stay in this tab.
Microphone test with playback: separate capture from output
An online mic test with playback lets you compare the live level with a short recorded sample. A moving meter alone does not prove that your recording will sound clear.
Mic record and playback
Choose your input, allow access and record a short spoken phrase at normal distance. Stop, play it back at a low volume and compare another input using the same phrase. Raw audio stays in this tab.
Mic playback is quiet, distorted or silent
If the meter never moves, check the selected input and permission. If capture works but playback is silent, check output routing and speaker volume. A clipped waveform suggests lowering input gain or increasing distance; do not confuse output volume with input gain.
Guides for this tool
See how this check fits into real troubleshooting workflows.
If the result is not what you expected
Check the route
Confirm the expected input or output is selected in both the OS and browser.
Close other apps
Another call or recording app may hold exclusive access to the device.
Review permissions
Allow device access for this site, then reload and start the test again.
How it works
- Choose Start Microphone Test and allow microphone access in your browser.
- Speak normally while the local audio analyzer measures level and peak activity.
- Optionally make a short local recording or run the guided quality check.
What this result cannot prove
- Measurements describe the stream delivered to this browser, not the microphone hardware in every app.
- Approximate dBFS, noise, and clipping indicators are diagnostic hints rather than laboratory measurements.
Related tools
Frequently asked questions
Does this mic test provide live monitoring?
The playback check uses a short local recording. Listen after recording; it is not a promise of real-time sidetone. If the level moves but playback is silent, also check the selected output device and volume.
Is this live mic playback?
The tool provides recording followed by playback, rather than continuous monitoring. Use headphones to avoid speaker feedback during tests.
Does microphone playback prove call quality?
No. A meeting app may apply processing or use a different input. This checks local capture and playback; it does not measure a remote call path.